Where to buy used plant machinery in the UK: dealers, auctions and marketplaces

You can buy used plant machinery in the UK from plant dealers, hire companies selling machines off their fleets, auctions and online marketplaces. The Commercial Trader, a UK marketplace for commercial vehicles, machinery and equipment, had about 4,530 listings of new and used plant machinery for sale on 19 November 2026, across 57 categories from excavators, mini diggers and telehandlers to wheel loaders and forklifts.

The route you choose changes what comes with the machine. A dealer usually prepares it, a hire company can show how it was looked after, and an auction or a private sale leaves most of the checking to you.

Where can you buy used plant machinery in the UK?

Used plant machinery is sold in five ways in the UK: by plant dealers, by hire companies, at auction, on online marketplaces and directly by contractors. The table shows what each route gives you and what to watch for.

RouteWhat you getWhat to watch for
Plant dealerA machine that’s been checked and prepared, sometimes with a warrantyUsually higher prices than a private sale
Hire company fleet saleA machine with one owner and a service recordIt has worked for a living, so check the hours and the wear
AuctionA wide choice on one day and a quick purchaseSold as seen, little time to inspect, and a buyer’s premium on top
Online marketplace such as The Commercial TraderMachines from many sellers in one place, and direct contact with each sellerYou arrange the checks, the viewing and the transport yourself
Direct from a contractorA machine with a known working historyNo warranty, and the paperwork is yours to check

Which websites list used plant machinery for sale?

Two kinds of website list used plant machinery: classified marketplaces, where you contact the seller, and auction platforms, where you bid against other buyers. The Commercial Trader is a classified marketplace, so the price and the sale are agreed between you and the seller.

An auction platform sells plant machinery on set dates, either in a timed online sale or at a yard with online bidding. Auction lots are usually sold as seen, the buyer pays a premium on top of the hammer price, and the machine has to be collected by a deadline.

A good plant machinery listing shows the make, model, year, hours, serial number, price and location. If a listing leaves some of those out, ask the seller for them before you travel.

General sites such as eBay, Gumtree and Facebook Marketplace also carry plant machinery, often from private sellers. More of the checking falls to you there, because the listing may say little about the machine’s history.

How many used plant machines are listed on The Commercial Trader?

The Commercial Trader had about 4,530 new and used plant machinery listings on 19 November 2026, in 57 categories. The table shows five of its machine categories on that day.

CategoryListings on 19 November 2026
Used excavatorsabout 410
Used wheel loadersabout 310
Used forkliftsabout 210
Used mini diggersabout 115
Used telehandlers43

These counts come from The Commercial Trader’s listing pages, which show nine machines a page, and they change daily. Counts on different websites don’t compare directly, because some include machines outside the UK, attachments and parts.

Makes on the first page of each category on 19 November 2026 included Volvo, Caterpillar and Liugong excavators, Caterpillar and Volvo wheel loaders, and Manitou, Still and Combilift forklifts.

The Commercial Trader’s plant machinery page describes its sellers as manufacturers, plant hire companies, dealers and end-users. Each category can be filtered by price, year, hours, condition, location and distance.

Should you buy from a dealer, a hire company or an auction?

Buy from a dealer if you want the machine prepared and backed, from a hire company if you want a known history, and at auction if price and speed matter most and you can judge a machine yourself. None of the three is always the cheapest once repairs and transport are counted.

A dealer’s price usually includes preparation, and sometimes delivery and a warranty. A hire company can usually show a machine’s service record from new. An auction price leaves the transport, the repairs and any examination to the buyer.

Whoever sells it, a machine supplied for use at work has to be safe. The Health and Safety Executive says anyone supplying second-hand equipment for use at work must make sure, so far as reasonably practicable, that it’s safe, and that covers dealers, auctioneers and private sellers.

The buyer has duties too. The Provision and Use of Work Equipment Regulations put duties on whoever owns, operates or controls work equipment, as HSE’s guide to buying second-hand machinery explains.

What should a used machine come with?

A used plant machine should come with its operator’s manual, its service records and proof that the seller owns it. Anything that lifts should also come with its latest report of thorough examination.

Lifting equipment has to be thoroughly examined at least every 12 months, or every 6 months if it lifts people, unless an examination scheme sets other intervals. Ask to see the current report, and read its date and any defects it lists.

Check that the serial number on the machine’s plate matches the paperwork, and ask for an invoice that shows the serial number and the seller’s name. A machine that’s registered for the road should also come with its V5C registration certificate.

How do you check a used machine isn’t stolen or on finance?

Record the machine’s serial number and run it through a register before you pay. The Equipment Register, known as TER, checks a machine against its theft records for £10 plus VAT, or against theft and finance records for £30 plus VAT, and it asks for the make, model and serial number, as its check service sets out.

Many machines also carry CESAR markings. CESAR is the construction and agricultural equipment security and registration scheme, owned by the Construction Equipment Association and launched in 2007. A machine with missing or damaged identification plates is a reason to walk away.

How do you buy plant machinery on The Commercial Trader?

Pick the machine category on The Commercial Trader, filter the list, and send an enquiry from the listing. The enquiry goes to the seller, and the sale is agreed between the two of you.

  1. Open used plant machinery for sale and choose a category.
  2. Filter by price, year, hours and condition.
  3. Add your location and a distance to see the machines nearest to you.
  4. Ask the seller for the serial number, the hours and the service records.
  5. View the machine and see it working before you pay.

Which machine are you buying?

The checks and the sellers differ by machine, so use the guide that matches what you’re buying. The Commercial Trader has separate guides for these machines:

If you’re selling a machine to fund the next one, see the guide to selling a used digger online.

Frequently asked questions

Where is the best place to buy used plant machinery in the UK?

The best place to buy used plant machinery depends on what you want with the machine. A dealer gives you a prepared machine and sometimes a warranty, a hire company gives you a known history, and an auction is quick. A marketplace such as The Commercial Trader lets you compare machines from many sellers before you contact anyone.

Which marketplace has the most used plant machinery listings?

The answer changes daily, and marketplaces don’t count in the same way. Some totals include machines outside the UK, attachments and parts. The Commercial Trader had about 4,530 new and used plant machinery listings on 19 November 2026, so compare each site’s count for the type of machine you want.

Can you buy used plant machinery on The Commercial Trader?

Yes. The Commercial Trader had about 4,530 new and used plant machinery listings on 19 November 2026, including about 410 excavators, 310 wheel loaders and 210 forklifts. You contact the seller directly from each listing.

Is it cheaper to buy plant machinery at auction?

Plant machinery can be cheaper at auction, but the hammer price isn’t the whole cost. A buyer’s premium and VAT are usually added, the machine is sold as seen, and you pay to move it. Set your limit with all of that counted.

Is it safe to buy used plant machinery online?

It’s safe to find a machine online, as long as you see it working and check its paperwork before you pay. Match the serial number to the documents, run a theft and finance check, and don’t send a deposit for a machine you haven’t seen.

What paperwork should come with a used plant machine?

A used plant machine should come with its operator’s manual, its service records and an invoice showing the serial number and the seller’s name. A machine that lifts, such as a telehandler or a forklift, should also come with its current report of thorough examination.

How do I check a used machine isn’t stolen?

Take the make, model and serial number and run a check with The Equipment Register, which costs £10 plus VAT for theft records or £30 plus VAT for theft and finance. Check that the serial number plate hasn’t been tampered with, and note any CESAR markings on the machine.

Thanks, your submission was successful!

Seller Details

Listing Address

Advertise with The Commercial Trader

Thanks for choosing to advertise on The Commercial Trader – please fill in your information below and one of our team will be in contact within the next 48 hours to arrange uploading your products for you.