You can buy a used telehandler in the UK from plant and agricultural machinery dealers, hire companies selling machines off their fleets, auctions and online marketplaces. The Commercial Trader, a UK marketplace for commercial vehicles, machinery and equipment, listed more than 30 new and used telehandlers for sale on 19 November 2026, from makes including JCB, Merlo, Manitou, Caterpillar and Bobcat, with asking prices from £13,750.
A telehandler is lifting equipment, so the paperwork matters as much as the machine. Before you agree a price, ask for the current report of thorough examination and check that the serial number matches the documents.
Where can you buy a used telehandler in the UK?
A used telehandler can be bought from a maker’s dealer, an independent plant or agricultural dealer, a hire company’s fleet sale, an auction, an online marketplace or directly from a farm or contractor. The table shows what each route gives you and what to watch for.
| Route | What you get | What to watch for |
|---|---|---|
| Maker’s dealer | A machine of one make, checked and often sold with a warranty | Usually higher prices, and one make only |
| Independent plant or agricultural dealer | A choice of makes and ages, often prepared and delivered | What any warranty covers, and for how long |
| Hire company fleet sale | One owner and a service record | Hire machines work hard, so check the hours and the wear |
| Auction | A quick purchase, often at a lower price | Sold as seen, with a buyer’s premium on top |
| Online marketplace such as The Commercial Trader | Telehandlers from many sellers in one place, and direct contact with each seller | You arrange the checks, the viewing and the transport yourself |
| Direct from a farm or contractor | A machine with a known working history | No warranty, and an examination to arrange if the last report has run out |
What used telehandlers are for sale on The Commercial Trader?
The Commercial Trader listed more than 30 new and used telehandlers on 19 November 2026, from JCB, Merlo, Manitou, Caterpillar, Sennebogen, Bobcat, Massey Ferguson and John Deere. The machines dated from 1996 to 2024, and 23 of them showed a price.
| Telehandler | Year | Asking price on 19 November 2026 |
|---|---|---|
| JCB 530-70 | 1996 | £13,750 |
| Manitou MT932 | 2000 | £14,750 |
| JCB 535-125 | 2005 | £15,500 |
| Caterpillar TH407C | 2014 | £27,500 |
| JCB 540-140 | 2018 | £34,995 |
| JCB 536-70 Agri-Super | 2019 | £37,500 |
| Merlo TF35.7-140 | 2021 | £46,950 |
| JCB 542-70 AgriXtra | 2021 | £49,750 |
These are asking prices taken from The Commercial Trader’s listings on the day, and the listings change daily. Some sellers give the hours in the listing: the 2018 JCB 540-140 was listed at 5,228 hours and the 2005 JCB 535-125 at 6,420 hours.
The telehandler page on The Commercial Trader can be filtered by price, year, hours, condition, location and distance.
How much does a used telehandler cost?
On The Commercial Trader on 19 November 2026, asking prices for used telehandlers started at £13,750 for a 1996 JCB 530-70. Most of the 23 telehandlers that showed a price were between £13,750 and £49,750, and the highest were two heavy-duty Sennebogen 355 E machines at £96,978 and £107,508.
Age, hours, lift capacity and reach move the price of a used telehandler more than anything else. Check whether an asking price is plus VAT before you compare two machines, and ask which attachments are included.
Should you buy a construction or an agricultural telehandler?
Buy the telehandler that was built for the work you do, because construction and agricultural machines are specified differently. Agricultural telehandlers are set up for farm work, typically with a trailer hitch and hydraulic services for attachments, while construction telehandlers are set up for site work and lifting to height.
The model name usually tells you which kind you’re looking at. Listings on The Commercial Trader on 19 November 2026 included agricultural models such as the JCB 536-70 Agri-Super and 542-70 AgriXtra, a waste-specification JCB 550-80 Wastemaster, and rotating Merlo Roto machines.
For sizing a telehandler to the loads and heights you work with, see the guide to choosing a used telehandler by capacity and reach.
What paperwork should a used telehandler come with?
A used telehandler should come with its current report of thorough examination, its operator’s manual with the load charts, its service records and proof that the seller owns it. Check that the serial number on the machine’s plate matches all of them.
The load chart matters because a telehandler’s safe working load changes as the boom goes up and out. HSE’s guidance on lifting equipment in agriculture says the operator needs clearly visible information to keep the machine and its load within safe limits.
Whoever sells the telehandler, it has to be safe when it’s supplied for use at work. HSE says that applies to anyone supplying second-hand equipment, including dealers, auctioneers and private sellers.
How often does a telehandler need a thorough examination?
A telehandler needs a thorough examination by a competent person at least every 12 months, or every 6 months if it’s used to lift people, unless an examination scheme sets other intervals. Those are the intervals HSE gives for thorough examinations of lifting equipment.
Ask the seller for the current report, and read its date and any defects it lists. If there’s no report, or the report has run out, book an examination before the telehandler goes to work. HSE is also clear that nobody should be lifted in a telehandler’s bucket or on its forks.
Do you need training to operate a telehandler?
Yes. Anyone operating a telehandler at work has to be trained, competent and authorised to use that machine, and it’s the employer’s job to make sure of it. HSE’s guidance on telescopic handlers says certificates from recognised training schemes help to show competence.
Buying a used telehandler doesn’t change who can drive it. Plan the training before the machine arrives, especially if it’s a different type or size from the one your operators know.
How do you check a used telehandler isn’t stolen or on finance?
Match the serial number on the telehandler’s plate to the paperwork, then run that number through a register before you pay. The Equipment Register, known as TER, checks a machine against its theft records for £10 plus VAT, or against theft and finance records for £30 plus VAT, as its check service sets out.
Many telehandlers carry CESAR markings. CESAR is the construction and agricultural equipment security and registration scheme, owned by the Construction Equipment Association and launched in 2007. A missing or damaged serial plate is a reason to walk away.
How do you buy a telehandler on The Commercial Trader?
Open the telehandler page on The Commercial Trader, filter it, and send an enquiry from the listing. The enquiry goes to the seller, and the sale is agreed between the two of you.
- Open used telehandlers for sale and filter by price, year and hours.
- Add your location and a distance to see the telehandlers nearest to you.
- Ask the seller for the serial number, the hours and the current report of thorough examination.
- Run a theft and finance check on the serial number.
- See the boom lift, extend and lower before you pay, with a competent operator at the controls.
The Commercial Trader also lists used forklifts and other used plant machinery. There are separate guides to where to buy a used forklift, where to buy a used JCB and selling used plant machinery online.
Frequently asked questions
Where is the best place to buy a used telehandler?
The best place to buy a used telehandler depends on how much support you want with it. A maker’s dealer gives you a checked machine and often a warranty, a hire company gives you a known history, and an auction is quick. A marketplace such as The Commercial Trader lets you compare telehandlers from many sellers by price, hours and location.
Can you buy a used telehandler on The Commercial Trader?
Yes. The Commercial Trader listed more than 30 new and used telehandlers on 19 November 2026, from makes including JCB, Merlo, Manitou and Caterpillar. You contact the seller directly from each listing.
How much is a used telehandler?
On The Commercial Trader on 19 November 2026, asking prices for used telehandlers started at £13,750 for a 1996 JCB 530-70, and most were under £50,000. A 2018 JCB 540-140 was listed at £34,995 and a 2021 JCB 542-70 AgriXtra at £49,750. Age, hours, capacity and reach all move the price.
Does a used telehandler need a thorough examination report?
Yes. A telehandler is lifting equipment, so it needs a thorough examination at least every 12 months, or every 6 months if it lifts people. Ask the seller for the current report, and book an examination before using the telehandler if the report is missing or out of date.
Do I need training to operate a telehandler?
Yes. Anyone operating a telehandler at work has to be trained, competent and authorised to use that machine. Arranging the training is the employer’s responsibility, and a certificate from a recognised scheme helps to show it’s been done.
Is it better to buy a telehandler from a dealer or at auction?
A dealer suits a buyer who wants the telehandler prepared, examined and delivered. An auction suits a buyer who can judge a machine in a short viewing and accept it as seen. At auction, add the buyer’s premium, VAT, transport and a thorough examination to the hammer price before you compare the two.
How do I check a used telehandler isn’t stolen?
Take the make, model and serial number and run a check with The Equipment Register, which costs £10 plus VAT for theft records or £30 plus VAT for theft and finance. Look for CESAR markings on the telehandler, and walk away if the serial plate is missing or damaged.