Gas interlock system pack
complies with the mandatory requirement (BS 6173: 2001) for commercial kitchens. The IP56 rated control unit ensures there is no gas flow to burners unless air extraction is present.
Key Features
Clear LED indication
Integral 2 Channel Fan Current Monitor
Interfaces for:
Intake Fan DP, Extract Fan DP, CO2 Sensors, Remote Emergency Stop Buttons
Mains rated status relay for external monitoring
Built in time delays to avoid nuisance tripping
5 Year Warranty
Technical Specification
Power Supply 100 -240VAC 50/60Hz
Consumption (Max) 50W
Fan Current Rating 0.2 – 15A @ 230V
Power Output Gas Solenoid – Switched Mains
IP Rating IP65
Approval CE
Dimensions
Height 180 mm
Width 130 mm
Depth 60 mm / 65 mm including Stop ∓ Key Switch
The panel has interfaces for air DP switches as well as have integral fan current monitors for both the intake and extract. Each channel can be easily setup using the range select jumper (for greater accuracy) and a potentiometer for fine tuning.
If the intake or extract fan are not in operation the panel will still allow gas through until they have been open circuit for a full 30 seconds. As some systems use the valve status to enable the fans this will allow the fans to get up to speed and provide a healthy signal to the Gas safety interlock unit
External Device Interfaces
Valve Status SPDT – 5A @ 240V Max
CO2 Sensor 24V Signal to monitor external VFC
Intake Fan 24V Signal to monitor external VFC
Extract Fan 24V Signal to monitor external VFC
Remote Stop 24V Signal to monitor external VFC
Satisifies BS EU Standards
BS 6173:2009 &IGEMUP/19
% year Warranty and manufactured in the UK Model: Gas interlock kit
