Fixed height range 4.5m – 10m
Tilt-down height range 4.5m – 15m
Altron Camera Columns, a cost effective and comprehensive range with most models available ‘ex stock’, offering a good level of security. Suitable for installations where the public has access – tilt-down models have internal padlock facility.The range is generally for light to medium fixed and PTZ applications, but there are also heavy duty (HD) options for high loading PTZ and dual lighting & CCTV applications.
General Features
Modular construction for ease of assembly and installation on site
Ideal for restricted access areas
Provides stable mounting platform for all camera types
Demountable winches ensure tilt down models are secure and reduces costs on
multiple installations
Tilt Down models enable camera maintenance at ground level, therefore reducing maintenance costs
Tilt Down models available in both bolt down and post mounted base versions
A wide range of standard Altron Accessories and Brackets available ex stock
Quick turnaround for larger projects
Constructed in high tensile steel and hot dip galvanised after fabrication for durability
Option of painting over the galvanised finish in colours available from BS and RAL colour charts
Security Features
Internal cabling
Internal padlock facility on tilt-down models to protect against unauthorised lowering
Close fitting flush doors
Solid secure heavy duty door locks
Types of Installation
Industrial and commercial premises
Perimeter detection
Utilities sites
Schools and universities
Railway platforms & car parks
Car parks
Petrochemical sites
Sports stadia
Applicable standards
Design
– Design analysis carried out using a specialist software package in accordance with ILE TR7, BS6399 and BS8100
Material and Finishing
– Structural steel hollow sections EN10219 – EN10025:2004
– Steel flat angles and structural sections EN10025, EN10111, EN 10130
– Foundation bolts Grade 4.6 spun galvanised BS4190, BS3692, DIN931, 934, 601
– Fixings: stainless steel Grade A2, galvanised Grade 4.6 Grade 8.8 BS4190, BS3692, DIN 931, 934, 601
– Hot dipped galvanising after fabrication to ISO 1461
– Painting in BS and RAL colours in accordance with BS4800
Manufacturing Processes
– Welding Procedures conform with BS EN 1011:2009, BS EN 9606-1
Winches
– Wire ropes to BS183:1972, BS EN 13411 3 2004 + A1 2008
– Winches conform to American ASAE standard S361.IT.
Options
Embeded base /EB
Backboard /BB
Tamper switch /TS
Column heights
All column products can be made to specific non-standard heights. For example an ACC1BPLA is a 4.5m column as standard
If a 4m variation is required, then specify ACC1BPLA/4
If a 5m variation is required, then specify ACC1BPLA/5
Column capacities and duty ratings
Standard column capacities are as specified in the Tech Table tab. If a higher capacity column is required, then please contact our Sales office who can advise on non-standard product configurations that will accommodate higher loading
Part Numbers
Fixed base columns with flush door lockable access
ACC1FBLA stock product
ACC2FBLA stock product
ACC3FBLA stock product
ACC4FBLA stock product
Embeded base fixed columns are made to order. Replace the -FB, with -EB – e.g. ACC1EBLA
Tilt-down base plate mounted columns with flush door lockable access
ACC1BPLA stock product
ACC2BPLA stock product
ACC2HDBPLA
ACC3BPLA stock product
ACC3HDBPLA
ACC4BPLA stock product
ACC4HDBPLA
ACC12BPLA
ACC15BPLA
Tilt-down post mounted columns with flush door lockable access
ACC1PMLA stock product
ACC2PMLA stock product
ACC2HDPMLA
ACC3PMLA stock product
ACC3HDPMLA
ACC4PMLA
ACC4HDPMLA
ACC12PMLA
ACC15PMLA
