AW1697 – Cabinet Based Square Section Columns – Tilt-down
Height range 4.5m – 15m
A cost effective and comprehensive range of CCTV Columns, with most models available ‘ex stock’, offering a good level of security.The column base post has a built in cabinet for mounting equipment within the one unit, therefore providing cost savings where a separate cabinet would otherwise need to be used. Suitable for installations where the public has access, these columns have an internal padlock facility.The range is generally for light to medium fixed and PTZ applications, but there are also heavy duty (HD) options for high loading PTZ and dual lighting & CCTV applications.
General Features
Modular construction for ease of assembly and installation on site
Ideal for restricted access areas
Provides stable mounting platform for all camera types
Demountable winches ensure security and reduces costs on multiple installations
Enable camera maintenance at ground level, therefore reducing maintenance costs
A wide range of standard Altron Accessories and Brackets available ex stock
Quick turnaround for larger projects
Constructed in high tensile steel and hot dip galvanised after fabrication for durability
Option of painting over the galvanised finish in colours available from BS and RAL colour charts
Security Features
Internal cabling
Internal padlock facility
Close fitting flush doors
Solid secure heavy duty door locks
Types of Installation
Industrial and commercial premises
Perimeter detection
Utilities sites
Schools and universities
Sports stadia
Railway platforms & car parks
Car parks
Petrochemical sites
Securing compounds
Applicable standards
Design
– Design analysis carried out using a specialist software package in accordance with ILE TR7, BS6399 and BS8100
Material and Finishing
– Structural steel hollow sections EN10219 – EN10025:2004
– Steel flat angles and structural sections EN10025, EN10111, EN 10130
– Foundation bolts Grade 4.6 spun galvanised BS4190, BS3692, DIN931, 934, 601
– Fixings: stainless steel Grade A2, galvanised Grade 4.6 Grade 8.8 BS4190, BS3692, DIN 931, 934, 601
– Hot dipped galvanising after fabrication to ISO 1461
– Painting in BS and RAL colours in accordance with BS4800
Manufacturing Processes
– Welding Procedures conform with BS EN 1011:2009, BS EN 9606-1
Winches
– Wire ropes to BS183:1972, BS EN 13411 3 2004 + A1 2008
– Winches conform to American ASAE standard S361.IT.
Options
Tamper switch /TS
4 point locking door /A4P
High security lock /HS
Column heights
All column products can be made to specific non-standard heights. For example an AW1697/4.5 is a 4.5m column as standard
If a 4m variation is required, then specify AW1697/4
If a 5m variation is required, then specify AW1697/5
Column capacities and duty ratings
Standard column capacities are as specified in the Tech Table tab. If a higher capacity column is required, then please contact our Sales office who can advise on non-standard product configurations that will accommodate higher loading
Part Numbering
AW1697/4.5 Stock product
AW1697/6 Stock product
AW1697/6HD
AW1697/7.5
AW1697/7.5HD
AW1697/9
AW1697/10HD
AW1697/12
AW1697/15
