FEATURES OF THE TIGERLOOP COMBI BIO DEAERATOR:
Integrated filter and optional vacuum gauge
Installation is done with fewer connections
Developed for Biofuel (bio-liquids)
Automatic de-aerator for oil burner
Maximum operating temperature of 60ºc
Tigerloop Bio Combi Deaerator
The New Tigerloop Combi Bio is developed for Biofuel (Bio-liquids) produced to EN 14213, Heating Oil and C2 Kerosene. Also suitable for blends of the same of up to B100. The Tigerloop Combi Bio offers several advantages thanks to the integrated filter. It allows the possibility of choosing different filter inserts depending on the need. The installation is done with fewer connections simplifying work and reducing the risk for leakage.
he Tigerloop Combi Bio offers several advantages thanks to the integrated filter. It allows the possibility of choosing different filter inserts depending on the need. The installation is done with fewer connections simplifying work and reducing the risk for leakage. The Tigerloop automatically and continuously de-aerates the fuel by venting to the atmosphere. This is the only way to prevent air or gas bubbles, which form during suction of oil from the tank, from entering the burner. This proven method of de-aeration ensures the best possible efficiency for the heating system.
A Tigerloop makes a one-pipe system possible for all types of oil heating installations helping to ensure environmental safety, cost effectiveness and reliability:
EFFECTIVE DEAERATION:
In an oil heating system using a Tigerloop, all oil passes through the automatic oil de-aerator, which effectively removes all gas/air bubbles from the system. This eliminates oil pump and nozzle problems associated with gas/air in the oil.
OWN TWO-PIPE CIRCULATION:
An oil pump delivers the same amount of oil irrespective of what is actually needed for combustion. In the case of a normal domestic burner, only 5 % of the delivered oil is actually burned in combustion. The remaining 95% is transported by a two-pipe system back to the oil tank. With a Tigerloop automatic oil de-aerator no oil needs to be transported back to the tank. The oil that is not burned in combustion is lead back to the Tigerloop where it is de-aerated again and again automatically. For this reason only the amount of oil to be burned in combustion is sucked from the oil tank.
PRE-HEATED OIL:
A one-pipe system with Tigerloop increases the oil pump capacity. Moreover, the oil is actually preheated to at least room temperature as friction in the oil pump generates heat. This eliminates problems with cold oil giving cleaner combustion and reduced oil consumption.
MINIMUM DIRT/SLUDGE:
The oil flow in a one-pipe system is minimal due to the fact that only the amount of oil burned needs to be drawn up from the tank. For this reason very little dirt/sludge is transported from the oil tank. This reduces the risk for clogged oil filters and burner nozzles. Filtration is more effective, soot build up is reduced and filter life is extended.
This Tigerloop Bio Combi Deaerator is not the only deaerator in the Tigerloop range to see the complete range please see here – Tigerloop Deaerators
Weight 2 kg
Nozzle Capacity
110lph
Return Flow Rate
120lph
Max Flow Rate
230lph
Max Deaerating Temp
60°C
Max Pressure
0.5 to -0.6 Bar
