FEATURES OF THE TIGERLOOP PLUS DEAERATOR:
Includes vacuum meter, shut-off valve and spin-on paper filter.
Installation is done with fewer connections
developed to meet the highest demands for cleaner air-free oil
Automatic de-aerator for oil burner
Maximum operating temperature of 60ºc
Pump & Tank Connection – 1/4″ F
TIGERLOOP PLUS DEAERATOR
In an oil heating system using a Tigerloop Plus, all oil passes through the automatic oil de-aerator, which effectively removes all gas/air bubbles from the system. This eliminates oil pump and nozzle problems associated with gas/air in the oil.
The Tigerloop Plus has been developed to meet the highest demands for cleaner air-free oil. The flagship of the Tigerloop range, the smart, all-in-one design includes a vacuum gauge for full control and simple troubleshooting, a shut off valve for easy service and a Spin-on paper filter for the toughest filtration needs. This unit has an extremely large filtration area of 1850 cm2 with a filtration grade of 20 microns.
A Tigerloop makes a one-pipe system possible for all types of oil heating installations helping to ensure environmental safety, cost effectiveness and reliability.
EFFECTIVE DEAERATION:
In an oil heating system using a Tigerloop, all oil passes through the automatic oil de-aerator, which effectively removes all gas/air bubbles from the system. This eliminates oil pump and nozzle problems associated with gas/air in the oil.
OWN TWO-PIPE CIRCULATION:
An oil pump delivers the same amount of oil irrespective of what is actually needed for combustion. In the case of a normal domestic burner, only 5 % of the delivered oil is actually burned in combustion. The remaining 95% is transported by a two-pipe system back to the oil tank. With a Tigerloop automatic oil de-aerator, no oil needs to be transported back to the tank. The oil that is not burned in combustion is lead back to the Tigerloop where it is de-aerated again and again automatically. For this reason only the amount of oil to be burned in combustion is sucked from the oil tank.
PRE-HEATED OIL:
A one-pipe system with Tigerloop increases the oil pump capacity. Moreover, the oil is actually preheated to at least room temperature as friction in the oil pump generates heat. This eliminates problems with cold oil giving cleaner combustion and reduced oil consumption.
MINIMUM DIRT/SLUDGE:
The oil flow in a one-pipe system is minimal due to the fact that only the amount of oil burned needs to be drawn up from the tank. For this reason very little dirt/sludge is transported from the oil tank. This reduces the risk for clogged oil filters and burner nozzles. Filtration is more effective, soot build-up is reduced and filter life is extended.
The Tigerloop Plus Deaerator is just one in the large range of Deaerators we supply to see the complete range click here – Tigerloop Deaerators
