Pump Type – Peristaltic
Max Flow Rate – 1.2M³H
Max Head – 80M
Pump Materials – EPDM, Hypalon, NBR, NBR-A, Norprene, NR
Max Temp – 80°C
Max Viscosity – 20,000 cst
Max Solid Passage – 22mm
Self Priming – Y
Inlet/Outlet Sizes – 25mm
Drive – AC Electric, Bareshaft
Max Suction Lift – 8M , Description: BOYSER AMP-22 Peristaltic Hose Pumps
AMP-22 Model / 1” BSP Connections
These heavy duty industrial peristaltic pumps with roller technology are supplied with reinforced rubber hoses, integrated oversized reinforced bearings and rotors designed to perform under the most extreme environments. The AMP range is available with hose leakage detection, this feature is recommended for applications where the pump is left unattended or when pumping highly corrosive fluids.
The AMP series peristaltic pump, also known as a hose pump, is part of the positive displacement volumetric pump group. These pumps have quite a simplistic yet extremely robust design that enables them to be used for the most difficult of applications, such as transferring high viscosity products and fluids where a high concentration of solids is present, many of them being applications where other pumps would fail. Typical fluids include; Glue, Resins, Ink, Paint, Anti-foaming, Dyes, Detergents, Oils, Concrete, Mud, Sludge and Sewage/Effluent.
As one of their popular names indicates ‘hose pumps’, the pumping action is performed by a combination of a rubber hose located inside the casing of the pump and a rotor with a set of rollers or pads/shoes compressing the hose as they rotate. By pressing the hose whilst continually rotating, the rollers or pads push the fluid from the inlet side and towards the discharge side of the hose. This gentle pumping action means the flow rate achieved is directly proportional to the speed the rollers rotate and squeeze the tube/hose.
The unique pumping action creates a negative pressure on the suction side of the pump of up to 9 m.w.c., meaning the pump can self-prime and reach a suction lift of up to 9 metres vertically, this combined with the ability to run dry indefinitely and handle gasses makes the peristaltic hose pump the ideal solution for most pumping applications.
Another advantage of these pumps is how simple and economical they are to maintain. This is the due the fact that the hose is both the only wearing part in the pump and the only part that is in contact with the fluid.
The AMP range can be supplied either fixed speed or variable speed and is fully reversible. There are a wide range of accessories available to provide a complete custom solution for most applications, these are detailed below.
Design features & Benefits:
• Sealless – Minimising the risk of leaking.
• Efficient – Low power consumption.
• Self-priming – Up to 9 metres.
• Shear sensitive – Very gentle on the product being pumped.
• Capable of running dry indefinitely – Without the need to install any other device.
• Reversible flow ability – Ideal for tank emptying and fluid transfer applications.
• High dispensing accuracy – Excellent for dosing applications.
• Easy to clean as the inner hose is the only part in contact with the product.
• Suitable for food-grade applications – FDA approved.
• Resistant to abrasion and corrosion – Optional connections and coating materials.
• Requires low maintenance – Economical to run.
• Hose leakage detector available – Recommended when pump is working unattended.
Typical Applications:
• Chemical Dosing.
• Water Treatment.
• Food/Beverage Transfer.
• Construction.
• Sampling.
• Mining.
• Paper Industry.
• Agriculture.
• Pharmaceutical.
• Industrial & Chemical Process Transfer – Glue, Resins, Ink, Paint, Anti-foaming, Dyes, Detergents, Oils, Concrete, Mud, Sludge, Sewage.
Accessories:
• Pulsation Dampener – This is fitted downstream from the pump to ensure a smooth and stable flow. This is particularly beneficial when using ancillary equipment such as pressure switches and flow meters or when measuring the product for bottling, packaging etc.
• Hose Leakage Sensor – This is connected to the pump casing and wired to an external control panel. The sensor detects if the internal rubber hose has broken and signals an alarm to warn the operator maintenance is required. This is particularly useful when the pump is unmanned, handling hazardous fluids or running continuously for critical applications.
• Anti-corrosive Coating – The pump casing can be coated in Halar (ECTFE) for corrosion resistance. This is recommended when the pump is installed in a corrosive or hazardous environment.
• Variable Speed Drive – The pump is supplied fixed speed as standard, an inverter can be fitted to the motor to enable variable flow rates, this is excellent for dosing and flow critical applications.
• Air Operated Vacuum Pump – This is recommended for high suction lifts. The vacuum system ensures the hose does not collapse under extreme conditions and facilitates easier priming for the pump.
• Screw Hopper Feeder – For dry and highly viscous fluids, a hopper/screw system is installed on the inlet side of the pump to enable easy flow of the product into the pump.
• Mobile Trolley – The pump can be supplied on a mobile trolley for moving around site. Bespoke dimensions and materials are available on request.
Read more about Peristaltic Pumps in our Guide
Configurations Available:
AMP-22 Bareshaft Pump – (Pump Only – Without Drive Unit)
Model: AMP22A0 – (0.246 ltr/rev)
Gearbox/Motor: 50 Hz-1450 RPM / 60 Hz-1720 RPM – (230-400V/3Ph)
Pumps with Gearbox/Motor Only (Fixed Speed) – 50-60Hz Freq.
Flow rate shown on l/h – (Nominal flow, tested on clean water at 2 bar.
Note, power/kW installed might need to be increased for working pressures above 4 bar
Model No. Power Speed Flow Ratio Frequency
AMP22A10
0.25 KW
17 RPM
251 l/h
82
20 – 60 Hz
AMP22A11
0.37 KW
30 RPM
339 l/h
60
20 – 60 Hz
AMP22A12
0.55 KW
29 RPM
428 l/h
49
20 – 60 Hz
AMP22A13
0.55 KW
38 RPM
561 l/h
36
20 – 60 Hz
AMP22A14
0.55 KW
45 RPM
664 l/h
31
20 – 60 Hz
AMP22A15
0.55 KW
54 RPM
797 l/h
25
20 – 60 Hz
AMP22A16
0.75 KW
66 RPM
974 l/h
21
20 – 60 Hz
AMP22A17
0.75 KW
72 RPM
1063 l/h
19
20 – 60 Hz
Gearbox/Motor: 50 Hz-1450 RPM / (230-400V/3Ph)
Pumps with mechanical speed controller – 50 Hz Freq.
Flow rate shown on l/h – (Nominal flow, tested on clean water at 2 bar.
Note, power/kW installed might need to be increased for working pressures above 4 bar
Model No. Power Speed Flow Ratio Frequency
AMP22A21
0.37 KW
4 – 20 RPM
59 – 295 l/h
49
50 Hz
AMP22A22
0.55 KW
6 – 32 RPM
89 – 472 l/h
31
50 Hz
AMP22A23
0.75 KW
9 – 48 RPM
133 – 708 l/h
21
50 Hz
AMP22A24
1.1 KW
14 – 71 RPM
207 – 1048 l/h
14
50 Hz
Gearbox/Motor: 50 Hz-1450 RPM / 60 Hz-1720 RPM – (400V/3Ph)
Pumps with Integrated Frequency Drive – 50-60Hz.
Flow rate shown on l/h – (Nominal flow, tested on clean water at 2 bar.
Note, power/kW installed might need to be increased for working pressures above 4 bar
Model No. Power Speed Flow Ratio Frequency
AMP22A31
0.55 KW
12 – 44 RPM
177 – 649 l/h
49
20 – 75 Hz
AMP22A32
0.75 KW
18 – 67 RPM
266 – 989 l/h
31
20 – 75 Hz
Gearbox/Motor: 50 Hz-1450 RPM / 60 Hz-1720 RPM – (230-400V/3Ph)
Pumps with VFD Rated Drive, Motor with Forced Cooling & PTC Sensors – 50-60Hz.
Flow rate shown on l/h – (Nominal flow, tested on clean water at 2 bar.
Note, power/kW installed might need to be increased for working pressures above 4 bar
**Frequency Drive Not Included**
Model No. Power Speed Flow Ratio Frequency
AMP22A41
0.55 KW
2 – 44 RPM
7 – 251 l/h
49
3 – 75 Hz
AMP22A42
0.75 KW
2 – 57 RPM
30 – 775 l/h
36
3 – 75 Hz
AMP22A43
1.1 KW
3 – 81 RPM
44 – 1196 l/h
25
3 – 75 Hz
Capacity
0.246 ltr/rev.
Flow Rate
Up To 1200 l/h
Head (Pressure)
Up to 8 bar
Inlet/Outlet Sizes/Types
1” BSP or NPT, 1” Tri-Clamp & DIN 11851
Connection Materials
PP, PVDF, PTFE, S.S. AISI316
Temperature Range
-15 to 60 °C – (Up to 80 °C for NBR-A)
Viscosity Range
20,000 cSt
Solid passage
Up to 22 mm
Max. Suction Lift
Able to Self-prime up to 8 m.w.c
Tube Materials Available
NR, NBR, EPDM, NBR-A, HYPALON, NORPRENE
