Product Code: PPW10028-MC
This is a new Profi 60 ton motorised hydraulic press from Workshop Press – a heavy-duty H-frame workshop press with a 588 kN pressing force, 750 mm working width, and 380 mm piston stroke. If you’re looking for a 60 ton hydraulic press for sale that’s ready to go from stock with a two-year warranty, this is it.
Press Specification and Performance
The heart of this machine is a top-quality double-acting (dual-acting) cylinder with a 170 mm bore and 75 mm rod diameter, producing 588 kN of force at a maximum system pressure of 259 bar. The piston head diameter is 100 mm. The hydraulic unit runs off a 1.5 kW three-phase motor (400V, 50/60 Hz, 3,000 RPM, IP54 protection) and delivers oil at two speeds – 2.8 litres per minute for precision work and 11.84 litres per minute for faster approach. That translates to a working speed of 2.07 mm/sec when you need control, an approach speed of 8.69 mm/sec to close the gap quickly, and a return speed of 10.79 mm/sec. The 41-litre oil reservoir keeps the system running without overheating during sustained use.
Operator control is via a joystick mounted on the unit, giving you full command of the ram through the pressing cycle. There’s also a hand pump for fine, precise pressing work where you need to creep up on a dimension. Speed selection between the two rates is handled by a lever directly on the hydraulic control unit – no fiddling with menus or electronics. A pressure regulation gauge is front-mounted on the machine so you can see exactly where you are during every press operation.
Working Bed and Frame
The working bed has six adjustable height positions and is repositioned using a chain adjustment system that works with the hydraulic ram – meaning you can set the bed height for different jobs quickly without wrestling heavy steel around by hand. The clearance from floor to piston in the upper position is 1,400 mm, giving you good headroom for taller assemblies or tooling setups.
Overall dimensions are 2,120 mm high x 1,000 mm wide x 695 mm deep, with a 750 mm clear working width between the frame uprights. The machine weighs 540 kg, so it stays planted during heavy pressing operations but is still within the capacity of a standard forklift or pallet truck for positioning.
Customisation and Accessories
Profi presses can be specified with modifications including a single-phase motor option, 60 Hz motor, bespoke frame dimensions, and system integrations for production line use. The accessories list covers V-block sets, foot pedals, hand controls, mandrel sets, brake press tooling, hole punches in various profiles, corner notchers, corner rounding notchers, tube and pipe notching tools, drain hole nibbler punches, and custom tooling to suit your specific application.
