Pump Type – Peristaltic
Max Flow Rate M³H – 0.03 M³H
Max Head – 71M
Max Temp – 80°C
Max Viscosity – 100,000 cst
Inlet/Outlet Sizes – 12mm
Drive – AC Electric
Power KW – 0.43kw , NRDSM Control Peristaltic Metering Pump
The NRDSM Control is an advanced peristaltic Metering pump with built in controller to enable users to directly control and monitor dosing rates of fluids.
Designed for the metering, dosing and transfer of abrasive, viscous or gaseous liquids it transfers them without any possibility of air locking or clogging.
Its peristaltic design means the unit contains only a single wearing part – its high performance hose which guarantees exceptional chemical and wear resistance.
Not only does the hose guarantee many years of trouble free service but should the hose leak, a built in alarm stops the pump operating, preventing chemical leakage or waste.
Control of the pump is performed by an intuitive click wheel ensuring simple operation and adjustment of the pump. Dosing rate can be adjusted from ml to Litres or Gallons an hour with pressures available up to 7 bar. It is capable of dry running and to continuously dose in industrial applications.
Built with connectivity in mind, there is the ability to control the unit via leading process control systems, 4-20ma analogue control, contact controllers or timers. This enables the pump to be used in conjunction with float switches, flowmeters and level switches adjusting dosing rate as necessary.
The pump is driven by a long life brushless motor ensuring reduced maintenance, long lifespan, almost no electromagnetic interference and high efficiency.
Typical Areas of use are:
Chemical Industry
Electroplating
Food and Beverage Industry
Industrial Applications
Leisure Industry
Paper Industry
Wastewater Treatment
Product summary
Easy adjustment and display of dosing rate in L/h, Ml/h or gal/hour
Batch by volume, time or external contact e.g. float switch, external plc or flowmeter
Valve free metering on par with a diaphragm metering pump without external accessories
High Accuracy due to unit being calibrated according to fluid being dosed.
Tool Free hose change in minutes
Suitable for the transfer of abrasive, shear sensitive, viscous and gaseous liquids without chance of airlock or cross contamination.
Wide viscosity handling up to 100,000 cst
Control options include process control systems such as BUS (Profibus), Profinet and CANbus, or analogue 0/ 4-20ma signal, contact controller, or timer.
3 Configurable inputs and outputs for use with signal relays or trigger for timer programs
Built in alarm for hose replacement prior to rupture
Integrated calendar for function automation
Internet of Things (IOT) Enabled for control and feedback
Hoses available in TPV (Thermoplastic) & Polyurethane, Connectors in PVDF/PTFE
Accuracy +- 2% after 200 revolutions
Single Phase Power Supply in 100-230V, 50 or 60Hz
IP66 / NEMA 4X Motor
Ambient Temperature: up to 45°C , Product code: NRDSM Control Peristaltic Metering Pump
