Pump Type – Centrifugal
Max Flow Rate – 75M³H
Max Head – 38M
Pump Materials – PP, PP with Carbon Impregnation
Max Temp – 95°C
Max Viscosity – 500 cst
Max Solid Passage – 9mm
Self Priming – N
Inlet/Outlet Sizes – 25mm to 50mm
Drive – AC Electric, Bareshaft
Max Suction Lift – 0 , MB Centrifugal Chemical Pump
Flow Rate
Up to 75m³/hr
Head (Pressure)
Up to 38m
Inlet/Outlet Sizes
1” to 2”
Operating Temperature
Up to 65°C (PP) Up to 95°C (PVDF)
Viscosity
Up to 500cp
Drive Options
Electric motor
The MB series of chemical centrifugal pump is designed for the transfer of clean or dirty chemicals up to a viscosity of 500cp. There are 10 models of pump within this range and the various sizes can cover flow rates up to 75m³/hr and heads up to 38m. The open impeller design allows the largest model in the range to handle suspended solids up to 9mm.
The casing of this heavy duty chemical pump is constructed from solid block polypropylene or PVDF depending on application requirements. The solid block casing has no welds like other chemical pumps, this makes it extremely resistant to the strongest of acids and alkalis as there are no weak points on the casing.
The sealing options are a lip seal in either Viton or EPDM and a bellow mechanical seal in either Viton or EPDM depending on the application requirements.
Applications for this centrifugal chemical pump include; mechanical and metalworking industry, ceramic industry, wastewater treatment, textile industry, automotive industry, paint industry, cosmetic industry and the cleaning industry.
This chemical centrifugal pump is available with an Atex zone 2 motor if required for operation in non-safe potentially flammable environments.
Product summary
• Solid block casing available in PP or PVDF with no welds
• Lip seal or bellow mechanical seal options
• Suitable for clean or dirty chemicals
• Open impeller design can handle solids up to 9mm
• Viscosity up to 500cp
• Single or Three phase motor options in either IEC or NEMA
• Atex Zone 2 motor available
• Easy maintenance
