Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.
Maximum Gross Power
55.7 kW
Engine Model
Cat C2.8*
Maximum Engine Speed
2550 rpm
Product specifications for 908 Compact Wheel Loaders
Engine
expand / collapse icon
Maximum Gross Power
55.7 kW
Engine Model
Cat C2.8*
Maximum Engine Speed
2550 rpm
Maximum Gross Power – Rated Engine Speed
2400 r/min
Maximum Gross Power – SAE J1995
55.7 kW
Maximum Gross Power – ISO 14396
55.4 kW
Maximum Gross Power – ISO 14396 (metric)
75.3 mhp
Rated Net Power – Rated Engine Speed
2400 r/min
Rated Net Power – SAE J1349
54.2 kW
Rated Net Power – ISO 9249
53.8 kW
Rated Net Power – 2,400 rpm – ISO 9249 (metric)
73.1 mhp
Maximum Gross Torque – SAE J1995
300 N·m
Maximum Gross Torque – ISO 14396
300 N·m
Maximum Net Torque – SAE J1349
296 N·m
Maximum Net Torque – ISO 9249
295 N·m
Displacement
2.8 l
Bore
90 mm
Stroke
110 mm
Note
Advertised power is tested per the specified standard in effect at the time of manufacture
Note (1)
Net power advertised is the power available at the flywheel.
Note (2)
*Two Cat C2.8 engine emission options are available: 1) Meets U.S. EPA Tier 4 Final, EU Stage V. 2) U.S. EPA Tier 3 and EU Stage IIIA equivalent. Tier 3 engine specs are 0.3 kW/0.4 hp more gross power (SAE J1995), 0.2 kW/0.3 hp on net power (SAE J1349) and 1 N·m/0.7 lb-ft higher on gross torque (SAE J1995).
Note (3)
#Maximum gross and net torque measured at 1,600 rpm.
Weights
expand / collapse icon
Operating Weight
6632 kg
Buckets
expand / collapse icon
Bucket Capacities
0.75-1.55 m³ (1.0-2.0 yd³)
Bucket Capacities – General Purpose
0.80-1.35 m³ (1.0-1.7 yd³)
Multi-Purpose
0.75-1.1 m³ (1.0-1.4 yd³)
Bucket Capacities – Light Material
1.25-1.55 m³ (1.6-2.0 yd³)
Note
Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Note (1)
Bucket capacities stated include BOCE, in line with ISO 7546.
Service Refill Capacities
expand / collapse icon
Fuel Tank
90 l
Cooling System
12 l
Engine Crankcase
8.8 l
Axles – Front Center Differential
8.8 l
Axles – Rear Center Differential
8.8 l
Hydraulic System – Including Tank
70.5 l
Hydraulic Tank
44.6 l
Transmission
2.4 l
Note
No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.
Axles
expand / collapse icon
Front
Fixed (standard), Locking Differential (optional)
Rear
Fixed (standard), Locking Differential (optional)
Note
Oscillation of ±11 degrees via hitch between front and rear frames.
Steering
expand / collapse icon
Steering Articulation Angle – Each Direction
39 °
Maximum Flow – Steering Pump
46.7 l/min
Maximum Working Pressure – Steering Pump
23000 kPa
Steering Cycle Times – (full left to full right) – at High Idle
2.8 s
Number of Steering Wheel Turns – Full Left to Full Right or Full Right to Full Left
3.25 turns or 4.00 turns
Transmission
expand / collapse icon
Forward and Reverse – Speed Range Creep#
10 km/h
Forward and Reverse – Speed Range 1*
10 km/h
Forward and Reverse – Speed Range 2** – High Speed
17 km/h
Forward and Reverse – Speed Range 2** – Standard
20 km/h
Forward and Reverse – Speed Range 3***
40 km/h
Note
#Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
Note (1)
*Creep function not available in this gear or above.
Note (2)
**Max speed dependent on model and configuration (standard vs. high speed transmission).
Note (3)
***Reverse is 30 km/h (19 mph).
Tires
expand / collapse icon
Tire Size – Standard
*405/70 R20 SPT9
Tire Size – Optional
405/70 R20 Powerloads
Tire Size – Optional (1)
400/70 R20 XMCL/Bibload
Tire Size – Optional (2)
360/80 R20 TRI 2
Tire Size – Optional (3)
40X14-20 TL, SM/TR
Note
*This tire has been used for all dimension, stability and performance data.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Cab
expand / collapse icon
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (1)
Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.
Loader Hydraulic System
expand / collapse icon
Main Relief – 1st Auxiliary (3rd slice)
23500 kPa
Main Relief – 1st Auxiliary (3rd slice) – Standard Flow*
90 l/min
Main Relief – 1st Auxiliary (3rd slice) – High Flow*
125 l/min
Main Relief – 2nd Auxiliary (4th slice)
23500 kPa
Main Relief – 2nd Auxiliary (4th slice) – Flow
45 l/min
Hydraulic Cycle Time – Rackback
2.5 s
Hydraulic Cycle Time – Lift
5.8 s
Hydraulic Cycle Time – Dump
1.8 s
Hydraulic Cycle Time – Float Down
3.6 s
Note
* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.
Dimensions – With HPL-V Coupler – Approximate#
expand / collapse icon
Height: Ground to Cab**
2670 mm
Height: Ground to Beacon**
2849 mm
Height: Ground Axle Center**
519 mm
Height: Ground Clearance**
320 mm
Length: Overall*
5544 mm
Length: Rear Axle to Bumper
1391 mm
Length: Hitch to Front Axle
1085 mm
Length: Wheel Base
2170 mm
Clearance: Bucket at 45° *
2623 mm
Clearance: Load over Height**
2960 mm
Clearance: Level Bucket**
3206 mm
Height: Bucket Pin**
3412 mm
Height: Overall**
4313 mm
Reach: Bucket at 45° *
706 mm
Carry Height: Bucket Pin
367 mm
Dig Depth**
109 mm
Width: Bucket
2080 mm
Width: Tread Center
1570 mm
Turning Radius: Over Bucket
4493 mm
Width: Over Tires
2021 mm
Turning Radius: Outside of Tires
4005 mm
Turning Radius: Inside of Tires
1981 mm
Rack Angle at Full Lift
53°
Dump Angle at Full Lift
45°
Rack Angle at Carry
51°
Departure Angle – Degrees
30°
Articulation Angle – Degrees
39°
Operating Weight: Bucket ^
6637 kg
Tipping Load – Straight – ISO 14397-1 †
4820 kg
Tipping Load – Full Turn – ISO 14397-1 †
4035 kg
Operating Weight: Carriage and Tines ^^
6467 kg
Tipping Load – Straight †
3297 kg
80% of Tip: Firm and Level EN474-3 ††
2638 kg
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Length: Front Axle to Front of Coupler
1200 mm
Dimensions – With SSL Coupler – Approximate
expand / collapse icon
Height – Ground to Cab
2670 mm
Height: Ground to Beacon**
2849 mm
Height: Ground Axle Center**
519 mm
Height – Ground Clearance
320 mm
Length – Overall with Bucket
5707 mm
Length: Rear Axle to Bumper
1391 mm
Length: Hitch to Front Axle
1085 mm
Length – Wheel Base
2170 mm
Clearance – Bucket at 45°
2511 mm
Clearance: Load over Height**
2960 mm
Clearance – Level Bucket
3197 mm
Height – Bucket Pin
3412 mm
Height: Overall**
4403 mm
Reach – Bucket at 45°
811 mm
Carry Height: Bucket Pin
388 mm
Dig Depth
117 mm
Width – Bucket
2080 mm
Width – Tread Center
1570 mm
Turning Radius – Over Bucket
4607 mm
Width – Over Tires
2021 mm
Turning Radius: Outside of Tires
4005 mm
Turning Radius – Inside Tire
2033 mm
Rack Angle at Full Lift
50°
Dump Angle at Full Lift
48°
Rack Angle at Carry
54°
Departure Angle – Degrees
30°
Articulation Angle – Degrees
39°
Operating Weight: Bucket ^
6691 kg
Tipping Load – Straight – ISO 14397-1 †
4347 kg
Tipping Load – Full Turn – ISO 14397-1 †
3693 kg
Operating Weight: Carriage and Tines ^^
6530 kg
Tipping Load – Straight †
4424 kg
80% of Tip: Firm and Level EN474-3 ††
2468 kg
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Tipping Load – Full Turn – ISO 14397-1†
3085 kg
Length: Front Axle to Front of Coupler
1436 mm
Dimensions – High Lift – With HPL-V Coupler – Approximate#
expand / collapse icon
Height: Ground to Cab**
2670 mm
Height: Ground to Beacon**
2849 mm
Height: Ground Axle Center**
519 mm
Height: Ground Clearance**
320 mm
Length: Overall*
6000 mm
Length: Rear Axle to Bumper
1391 mm
Length: Hitch to Front Axle
1085 mm
Length: Wheel Base
2170 mm
Clearance: Bucket at 45° *
3338 mm
Clearance: Load over Height**
3282 mm
Clearance: Level Bucket**
3693 mm
Height: Bucket Pin**
3898 mm
Height: Overall**
4769 mm
Reach: Bucket at 45° *
990 mm
Carry Height: Bucket Pin
367 mm
Dig Depth**
109 mm
Width: Bucket
2045 mm
Width: Tread Center
1570 mm
Turning Radius: Over Bucket
4825 mm
Width: Over Tires
2021 mm
Turning Radius: Outside of Tires
4005 mm
Turning Radius: Inside of Tires
1981 mm
Rack Angle at Full Lift
69°
Dump Angle at Full Lift
40°
Rack Angle at Carry
48°
Departure Angle – Degrees
30°
Articulation Angle – Degrees
39°
Operating Weight: Bucket ^
6735 kg
Tipping Load – Straight – ISO 14397-1 †
4167 kg
Tipping Load – Full Turn – ISO 14397-1 †
3468 kg
Operating Weight: Carriage and Tines ^^
6596 kg
Tipping Load – Straight †
4167 kg
80% of Tip: Firm and Level EN474-3 ††
2135 kg
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Dimensions – High Lift – With SSL Coupler – Approximate
expand / collapse icon
Height: Ground to Cab**
2670 mm
Height: Ground to Beacon**
2849 mm
Height: Ground Axle Center**
519 mm
Height: Ground Clearance**
320 mm
Length: Overall*
6157 mm
Length: Rear Axle to Bumper
1391 mm
Length: Hitch to Front Axle
1085 mm
Length: Wheel Base
2170 mm
Clearance: Bucket at 45° *
3181 mm
Clearance: Load over Height**
3282 mm
Clearance: Level Bucket**
3684 mm
Height: Bucket Pin**
3898 mm
Height: Overall**
4859 mm
Reach: Bucket at 45° *
1048 mm
Carry Height: Bucket Pin
388 mm
Dig Depth**
117 mm
Width: Bucket
2045 mm
Width: Tread Center
1570 mm
Turning Radius: Over Bucket
4919 mm
Width: Over Tires
2021 mm
Turning Radius: Outside of Tires
4005 mm
Turning Radius: Inside of Tires
1981 mm
Rack Angle at Full Lift
66°
Dump Angle at Full Lift
40°
Rack Angle at Carry
42°
Departure Angle – Degrees
30°
Articulation Angle – Degrees
39°
Operating Weight: Bucket ^
6836 kg
Tipping Load – Straight – ISO 14397-1 †
3803 kg
Tipping Load – Full Turn – ISO 14397-1 †
3149 kg
Operating Weight: Carriage and Tines ^^
6674 kg
Tipping Load – Straight †
3803 kg
80% of Tip: Firm and Level EN474-3 ††
1984 kg
Note (1)
*Vary with bucket
Note (2)
**Vary with tire
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (9)
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9
Sustainability
expand / collapse icon
Recyclability
93%
CONFIGURED FOR SUCCESS
Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has ahigh torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. Dependent on regional requirements our engines meet U.S. EPA Tier 4 Final and EU Stage V emission standards with a clean emission module designed to manage itself so you can concentrate on the task at hand or emit equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
ENJOY ALL DAY COMFORT
All new cab is spacious, quiet and comfortable with all around 360° visibility to keep you productive throughout the day. Seat-mounted controls feature a multifunction joystick for lift and tilt functions with an integrated thumb operated speed range, forward/neutral/reverse (FNR) switch, trigger operated differential lock and constant flow. Optional fourth function joystick also available.
Digital display with soft touch buttons for customized settings to easily control linkage and drive train to further enhance operator comfort and safety.
EFFICIENTLY POWERFUL
Cat C2.8 engine provides a cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar’s exclusive Intelligent Power Management system monitors operator input and available power to keep the machine working at peak efficiency.
“Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles. New Powertrain (Utility) Mode via the display enables right pedal machine operation giving further improved operator controllability of attachment RPM versus machine ground speed over creep control and inching pedal.
WORK MADE EASY
All-in-one joystick to keep eyes on the work while maximizing operation of hydro-mechanical attachments with a state of the art pressure compensated electro-hydraulic system. Optimized Z-bar linkage for great performance and versatility with buckets that now have the DNA of the larger Cat loaders, such as curved side plates and a flat torque tube for parallel reference to the cutting edge.
CUSTOMIZE YOUR EXPERIENCE
Work as one with your machine by customizing the controls. Operator can adjust machine responsiveness with the push of a button based on the attachment or application. Once customized, settings can be locked with “simplified mode” to ensure the machine is consistent and intuitive for every user.
Machine security is enhanced with a standard keycode or optional Bluetooth® technology.
PURPOSE BUILT SPECIALTY MODELS
Machines can be built to meet industry and application specific needs: Agriculture, General Construction, Industrial and Waste, Landscaping or Snow Removal.
The 908 is availble with the following specific handler arrangements: Ag Handler and Waste Handler
AFTERMARKET AND SERVICES
Range of services and aftermarket retrofits and upgrades available to keep your machine going and configured for your application.
Service and maintenance parts available, including a range of self-service options (SSO) and dealer installed kits.
Integrated Technology available to reduce service costs and maintenance.
SUSTAINABILITY
The Cat® C2.8 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
Advanced Electro Hydraulic System provides the optimum balance of power and efficiency while giving you the control you need for your precise jobsite requirements.
Engine Demand Fan is hydraulically driven to provide machine cooling only when needed, improving fuel efficiency and reducing greenhouse gas emissions.
Hydrostatic Transmission is an efficient way to transfer engine power to the wheels at low speeds versus a torque converter.
Efficient HVAC regulates temperature control. No need to leave the machine running to cool the cab.
Shift on the go transmission, means no need to stop so you keep your momentum.
908 Standard Equipment
Expand all
POWER TRAIN
expand / collapse icon
Emissions compliant, two options (Dependent on regional regulations.)
– U.S. EPA Tier 4 Final and EU Stage V
– U.S. EPA Tier 3 and EU Stage IIIA equivalent
Cat C2.8 engine
– Diesel particulate filter (Fit for Life) or muffler (Dependent on regional regulations.)
– Fuel, diesel, ultra low or low Sulphur (Dependent on regional regulations.)
– Hydrostatic transmission, two speed, with inching function, “shift on the go”
– Power train mode, hystat
Air cleaner, two stage filter, with in cab audio/visual indicator on display
Axles, heavy duty, frame mounted with outboard planetary reduction
Closed circuit breather
Coolant, extended life, –36° C (–33° F)
Drive shaft, sealed for life, universal joints
Engine, auto idle shutdown, hibernation mode
Engine oil, ECO drain tap and hose
Fuel pump, priming (manual)/water separator/drain
HYDRAULICS
expand / collapse icon
Hydraulic pilot shut off switch, in cab
Electro-hydraulic, fully proportional controls
Dead engine lower, lift valve, manual
Demand cooling fan, hydraulically drive
Coupler/pin on attachment ready
Caterpillar HYDO™ Advanced 10 hydraulic oil
Hystat displacement pump, infinitely variable
Implement valve, pressure compensated
Joystick, single lever, single auxiliary roller
Multi-function lift and tilt with loader arm float
Motor, single drive with dedicated implement and steering pumps
ELECTRICAL
expand / collapse icon
Alternator, 100 amp sealed
Battery, heavy duty, 12V, 90Ah and 1,000 CCA
Battery disconnect switch
Cab mounted fuse panel
Lights, rear stop and turn, LED
Lights, roading, front halogen
Service (Electronic Technician™)
Product Link™
OPERATOR ENVIRONMENT
expand / collapse icon
ROPS/FOPS certified canopy/cab
– 12V power outlets, interior/exterior
– Pedals, raised, foot, brake/inching, accelerator
– Lever, parking brake
– Cup holders (2)
– CB radio clip, phone holder
– Door release, internal (left and right)
– Hook, large, coat and hard hat
– Floormat, heavy duty, easy clean
– Mirrors, (2) external breakaway, (1) internal
– Operator station on isolation mounts
– Steering wheel, spinner knob, horn in center
– Seat belt, orange, retractable, 51 mm (2 in)
– Storage, personal (trays [3], seat pocket)
– Steering column, tilt adjusted
– Column mounted multi function control: lights, roading, wipers, self cancelling turn signals
– Quick coupler switch, in cab
Display, analog and digital
– Gauges (2), hydraulic oil, engine coolant
– Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages)
Joystick, seat mounted, standard multifunction
– FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
– Arm rest, padded right, multiple position vertical height
Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
Cab
– Doors (2), fixed glass
– Wipers, front and rear, full front coverage
– Windshield, front single piece
– Window, rear heated
– Radio ready, speakers and wiring
– Air vents, (4) screen, (7) directional
– Heating, mechanical control unit
– Sun visor, solid, front full width
– Interior light (incandescent)
OTHER
expand / collapse icon
Fenders, front and rear
Ground level easy access daily service points
Loader arm safety brace
Lockable main and side engine enclosures
Lockable, fuel cap, HVAC filters, nose cone
Machine lifting/tie down points
Paint, Electro-Coat primer, gloss topcoat
Recovery hitch with pin
Scheduled Oil Sampling (S·O·S℠) ports, engine oil and hydraulic oil
908 Optional Equipment
Expand all
POWER TRAIN
expand / collapse icon
Antifreeze, extended life coolant, –50° C (–58° F)
Cold start – jacket water heater, bypass valve
Creep and throttle lock function
Fuel pump, priming, electric (Dependent on regional regulations.)
40 km/h (25 mph) hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes
Power train mode, utility (includes keypad)
ELECTRICAL
expand / collapse icon
Lighting packages, multiple; front, rear, engine bay (LED or HAL)
Push to start
Work tool wiring harness, (3) in cab switches
HYDRAULICS
expand / collapse icon
Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve
Caterpillar Bio HYDO Advanced hydraulic oil
Connect under pressure and case drain
Ride Control or load check valves*
Reversing fan
Quick disconnect auxiliary hydraulics
OPERATOR STATION
expand / collapse icon
Air Conditioning, automatic temperature control (ATC)
Doors, sliding windows (left and right)
Interior light, door activated
Joystick, FNR, twin auxiliary roller, differential lock, horn
Joystick, seat mounted, multifunction
Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror
Phone holder, spring loaded
Radio, FM or digital audio broadcast
Seat belt options, multiple
Seat packages; deluxe or premium
Secondary display, front or rear view camera
Soft touch keypad options, 8 or 16 button
Storage, lockable box or lockable cooled box
Sun visor, rear perforated
USB ports (2), interior
OTHER
expand / collapse icon
Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)
Rotary sensors (snubbing, kickouts, parallel)
High lift option
