The Cat® D2 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
Engine Model
Cat® C3.6
Power – Net
68.8 kW
Displacement
3.6 l
Product specifications for D2 Small Dozers
Engine
expand / collapse icon
Engine Model
Cat® C3.6
Power – Net
68.8 kW
Displacement
3.6 l
Net Power – 2,200 rpm – SAE J1349
68.8 kW
Net Power – 2,200 rpm – ISO 9249/EEC 80/1269
68.8 kW
Note (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Engine
expand / collapse icon
Power Train
Hydrostatic
Weights
expand / collapse icon
Operating Weight
8338 kg
Operating Weight – LGP
8648 kg
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Weights
expand / collapse icon
Operating Weight
8338 kg
Cab
expand / collapse icon
FOPS
ISO 3449:2005 Level II
ROPS
ISO 3471:2008
Transmission
expand / collapse icon
Drive Pumps
1
Maximum Travel Speed – Forward
9 km/h
Relief Valve Settings
48500 kPa
Maximum Travel Speed – Reverse
10 km/h
Track Motors
2
Undercarriage
expand / collapse icon
Length – Track on Ground – LGP
2248 mm
Track Gauge
1550 mm
Number of Rollers – Each Side
7
Track Gauge – LGP
1725 mm
Ground Pressure – LGP
29.7 kPa
Shoe Width – Standard
460 mm
Shoe Width – LGP
635 mm
Number of Shoes – Each Side – Sealed and Lubricated Track (SALT) Undercarriage
43
Undercarriage
expand / collapse icon
Number of Shoes – Each Side – Abrasion Undercarriage
38
Ground Pressure
39.5 kPa
Length of Track on Ground
2248 mm
Service Refill Capacities
expand / collapse icon
Fuel Tank
195 l
Crankcase – With Filter
10.5 l
Final Drive – Each – LGP
10 l
Cooling System
19 l
Transmission – Hydraulic Tank
90 l
Diesel Exhaust Fluid (DEF) Tank
19 l
Service Refill Capacities
expand / collapse icon
Final Drives – Each Side
10 l
Hydraulic Controls
expand / collapse icon
Pump Output
65 l/min
Relief Valve Settings
20600 kPa
Ripper
expand / collapse icon
Type
Parallelogram
Number of Shanks
3
Height
165 mm
Weight
554 kg
Maximum Digging Depth
337.5 mm
Maximum Ground Clearance Under Tip
448 mm
Overall Width
1710 mm
Maximum Reach – Ground Line
766 mm
Air Conditioning System
expand / collapse icon
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Dimensions
expand / collapse icon
BLADE: Digging Depth – LGP
589 mm
BLADE: Blade Cutting Edge Angle, Adjustable – LGP
52° to 58°
BLADE: Blade Lift Height – LGP
708 mm
BLADE: Blade Width – LGP
3149 mm
BLADE: Blade Width at Maximum Angle – LGP
2874 mm
Track Gauge – LGP
1725 mm
Ground Clearance – LGP
332 mm
BLADE: Blade Height – LGP
910 mm
Overall Length – With Blade – LGP
4272 mm
BLADE: Blade Capacity (SAE) – LGP
1.85 m³
BLADE: Maximum Tilt – LGP
438 mm
BLADE: Maximum Angle (either side) – LGP
25°
Note
Abrasion Undercarriage
Length of Basic Dozer (without blade) – LGP
3290 mm
Width of Dozer (standard shoes, no blade) – Standard
2010 mm
Dozer Height – LGP
2765 mm
Dozer Height – Standard
2765 mm
Width of Dozer (standard shoes, no blade) – LGP
2360 mm
Length of Basic Dozer (without blade) – Standard
3290 mm
Dimensions
expand / collapse icon
BLADE: Maximum Angle (either side) – Standard
25°
Ground Clearance – Standard
332 mm
Overall Length – With Blade – Standard
4281 mm
BLADE: Blade Cutting Edge Angle, Adjustable – Standard
52° to 58°
BLADE: Maximum Tilt – Standard
387 mm
Track Gauge – Standard
1550 mm
BLADE: Digging Depth – Standard
593 mm
BLADE: Blade Width – Standard
2782 mm
BLADE: Blade Lift Height – Standard
743 mm
BLADE: Blade Capacity (SAE) – Standard
1.98 m³
BLADE: Blade Width at Maximum Angle – Standard
2542 mm
Note
With Ripper Attachment (add to Length of Basic Dozer) – 1177 mm (46.3 in)
BLADE: Blade Height – Standard
1010 mm
Retrieval Winch
expand / collapse icon
Maximum Line Speed – Full Drum
24 m/min
Maximum Line Speed – Bare Drum
15 m/min
Weight
794 kg
Drum Capacity – Optional Cable
59 m
Rope Diameter – Recommended
16 mm
Winch Drive
Hydraulic
Rope Diameter – Optional
19 mm
Drum Capacity – Recommended Cable
84 m
Maximum Line Pull – Full Drum
9231 kg
Speed
Variable
Maximum Line Pull – Bare Drum
14583 kg
Control
Hydraulic
Overall width
709 mm
Drum Width
245 mm
Drum Diameter
203.2 mm
Winch Length
905 mm
Throat Clearance
141.4 mm
High Performance Winch
expand / collapse icon
Maximum line pull – bare drum
18144 kg
Drum capacity – recommended cable
113 m
Winch length
705 mm
Overall width
741 mm
Control
Hydraulic
Maximum line speed – bare drum
40 m/min
Maximum line speed – full drum
63 m/min
Drum width
274 mm
Drum capacity – optional
78 m
Throat clearance
171.5 mm
Weight
610 kg
Rope diameter – recommended
16 mm
Speed
Variable
Maximum line pull – full drum
11340 kg
Drum diameter
254 mm
Rope diameter – optional
19 mm
Winch drive
Hydrostatic
IMPROVED VISIBILITY
The sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.
ENHANCED TECHNOLOGY
Cat small dozers include a suite of Operator Assist, Grade, and Cat Command Features that work seamlessly to save time, effort, fuel, machine wear and overall cost.
Stable Blade Lift and Tilt automatically works behind the scenes to allow operators to create smooth surfaces with less effort using accelerometers on the blade and chassis with an advanced algorithm to make minor blade raise and lower movements.
Blade Load Monitor provides real-time feedback of current load vs. target load to fully utilize machine capacity benefiting operators of all skills levels. Automatically compensates for ground conditions. This feature is not available indoors or in areas where a GPS signal is not available.
Low Slip Traction Control prevents excessive track slip to improve machine efficiency and reduce burden on the operator. Feature offers two modes: Normal Mode helps when pushing heavy blade loads by limiting non-productive track slip, recommended for most applications. And Low Slip Mode limits track slip for applications sensitive to slip such as spreading material on top of a liner, select this mode when needed.
AutoCarry™ raises and lowers the blade to maximize pushing capability and prevent excessive track slip when pushing heavy loads. Feature is designed to work in unison with other Operator Assist Features. Not available indoors or in areas where a GPS signal is not available.
Scalable 2D and 3D Cat Grade is an optional feature that makes your job up to 39% faster with up to 82% fewer operator inputs and less rework by maintaining blade angles for better surface quality – even with less experienced operators.
Cat Command remote control is an optional feature that takes you off the machine and away from hazardous conditions, dust, noise or vibration or operating on unstable surfaces. Eliminates risk of injury from climbing on or off the machine. Integrated with dozer systems, Cat Command enables smooth, precise control with access to all machine functions and advanced features (if equipped) for maximum efficiency and productivity.
UP TO 10% IMPROVED FUEL ECONOMY
The D2 features the lowest fuel consumption in this size class with the same great performance you’ve come to expect. Up to 20% improvement and no performance sacrifice when ECO mode is active.
COMFORTABLE WORK SPACE
The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.
BIGGER, BETTER DISPLAY WITH CAMERA
This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.
DURABLE UNDERCARRIAGE
The D2 is available with either a Sealed and Lubricated Track (SALT) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.
SUSTAINABILITY
The Cat® C3.6 engine meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014, and Korea Tier 5 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Engine Speed Control helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Cat® Grade with Slope Assist™ helps you avoid costly rework and wasteful fuel burn and greenhouse gas emissions by automating your blade position without a GPS signal.
Cat® Grade with 3D automates blade movements using a GPS signal helping you follow a grade design, reducing fuel burn and greenhouse gas emissions by improving efficiency and accuracy.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.
D2 Standard Equipment
Expand all
POWER TRAIN
expand / collapse icon
Air cleaner with precleaner, automatic dust ejection and under hood intake
Aluminum bar plate cooling system (radiator, power train)
Automatic traction control
Cat C3.6 diesel engine
Drive, auxiliary
Dual path, closed loop, hydrostatic transmission
Electric fuel pump
Fuel/water separator
Turbocharged aftercooled
ELECTRICAL
expand / collapse icon
Alarm, backup
Alternator, 150 amp, heavy duty
Batteries, heavy duty, maintenance free, 1,000 CCA
Diagnostic connector
Four integrated front halogen lights, two rear halogen
Horn, electric
Starter, electric, 12 V, heavy duty
UNDERCARRIAGE
expand / collapse icon
SALT undercarriage (43 section)
Carrier rollers
Guards, front/rear guiding
Seven roller track frame
Track adjusters, hydraulic
Track rollers, lifetime lubricated
HYDRAULIC
expand / collapse icon
Hydraulic pump and oil
Single lever, three function control
Three valve hydraulics
CAT TECHNOLOGY
expand / collapse icon
Low Slip Traction Control (included with ARO and Cat Grade 3D)
Slope Indicate
Stable Blade Lift and Tilt (included with ARO and Cat Grade 3D)
Compatibility with radios and base stations from Trimble, Topcon, and Leica
Capability to install 3D grade systems from Trimble, Topcon, and Leica
Cat Product Link™ PLE643/PLE743 Cellular
ATTACHMENTS
expand / collapse icon
Rigid drawbar
Front pull device
OPERATOR ENVIRONMENT
expand / collapse icon
Armrests, adjustable
Coat hook
Controls, seat mounted, fore/aft adjustment
Cup holders
Eco Mode
Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature
Electronic security system
Engine air cleaner service indicator
Engine RPM and gear display
Floor mat, rubber, heavy duty
Foot pads, dash
Hour meter, electronic
Independent forward/reverse speed settings
Mirror, rearview, inside
Power port, 12 volt
ROPS/FOPS canopy
Seat, air suspended, cloth or vinyl
Seatbelt, hi-vis retractable 76 mm (3″)
Seatbelt buckling indicator/reminder
Single pedal combining decel and brake functions
Speed recall
Storage compartment
Throttle switch, rotary
Travel speed limiter, electronic
D2 Optional Equipment
Expand all
POWER TRAIN
expand / collapse icon
Air cleaner with external precleaner
Installation, winch
ELECTRICAL
expand / collapse icon
Four integrated front LED lights, two rear LED
UNDERCARRIAGE
expand / collapse icon
Abrasion undercarriage (38 section)
Track Pairs
– Track, 460 mm (18 in)
– Track, 635 mm (25 in)
HYDRAULIC
expand / collapse icon
Four valve for use with ripper
Four valve for use with winch
CAT TECHNOLOGY
expand / collapse icon
Cat Grade with Slope Assist
Cat Grade with 3D
Blade Load Monitor (included with Cat Grade 3D)
AutoCarry (included with Cat Grade 3D)
Cat Product Link PLE683/PLE783 Cellular/Satellite
Full-color 10 in (254 mm) touchscreen grade display
Cat Command Console
Cat Command Station
ATTACHMENTS
expand / collapse icon
Drawbar, towing
Machine security system
Mounting, winch
Ripper, parallelogram, includes three shanks and teeth
Winch, hydraulic, high performance
Winch, hydraulic, retrieval
OPERATOR ENVIRONMENT
expand / collapse icon
Power Pitch
Cab, with air conditioning
Cab, polycarbonate windows and air conditioning
Radio, AM/FM Bluetooth®
Seat, air suspended, cloth or vinyl
Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls
Sound suppression
OTHER
expand / collapse icon
Heater, engine, coolant 120 V/240 V
Starting aid, ether
