PLEASE CONTATCT FOR FULL SPEC Lowerworks ▪ Independent travel driving units are adopted for each side of the crawler, to realize straight walking and turning driven by travel motor through gearbox and drive wheel. Crawler Extension and Retraction ▪ The crawlers can extend and retract via cylinders. During Work Mode, the crawlers must be extended, and be retracted during transport with crawlers on. Crawler Tensioning ▪ The jack is used to push the guide wheel and insert the shim to adjust crawler tension. Track Pad ▪ High-strength alloy cast steel track pad can prolong the service life. They are 770mm wide, and the total amount is 59pcs x 2. Operating Equipment ▪ All chords are high-strength steel tubes, and the boom/jib top sheaves are made of high-strength anti-wearing Nylon material protecting wire rope. The hooks are installed with milled welded steel sheave. Pendant cables with quick hitch connector that are easy to assemble are offered as options. Boom ▪ Lattice structure. The chord adopts high-strength structural tube and each section is connected through pins; ▪ Basic boom: 6.5m boom top + 6.5m boom base; ▪ Boom insert: 3m×1, 6m×3, 9m×2; ▪ Boom length: 13m~52m. Fixed Jib ▪ Lattice structure. The chord adopts high-strength structural tube and each section is connected through pins; ▪ Basic boom: 3.05m boom top + 3.05m boom base; ▪ Boom insert: 3.05m x 3; ▪ Jib length: 6.1m~15.25m; ▪ Longest boom + jib: 43m boom +15.25m jib. Extension Jib ▪ The extension jib is a welded structure connected to the boom top by pins, used for auxiliary
