75m Truck cherry pickers

The 75m truck mounted aerial work platform has a working outreach of 39m The full weight of this conversion is 31.8t and it has been mounted on a SCANIA truck. The fully automatic telescope lubrication system supplies the lower boom telescopes with grease during operation. As standard we fit an aluminium cage to the truck mounted aerial work platform. This is for ease of access when working at height and has a maximum capacity of 600Kg. An additional X-jib and a basket rotation of 2 x 200 degrees provides exceptional mobility, taking flexibility to even loftier heights. Some key features of this conversion are: Greater working range thanks to 240° X-jib 2 x 200° basket rotation for perfect positioning of the workman basket Telescopic upper boom up to 19 m total length Automatic telescope lubrication system supplies the lower boom telescopes with grease during platform operation Telescopic basket with up to 600 kg basket load and integrated preparation for Powerlift-System Hanging basket enables operators to work close to objects Secondary control at the turntable with seat, graphic display and foot pedal Intercom system between driver’s cab and cage 2 LED floodlight spots 230 VAC / 150W, 10100 Lumen 4 working lights mounted at the basic frame to illuminate the outrigger areas; switch at the outrigger control/truck chassis cabin Flashing light; on the left and right side at the turntable Technical Specification Max. working height : 75 m Max. cage bottom height : 73 m Max. outreach : 39 m Rotation angle of turntable : 540° Rotation angle of cage : 2 x 200° Rotation angle of cage boom : 240° Size of cage : 3.88 x 1.05 x 1.10 m Max. cage load : 600 kg Total weight : 32200 kg Overall length : 14.10 m Width in transportposition : 2.54 m Height in transportposition : 3.95 m Max. stabiliser width : 8.89 m Condition Bespoke Working height over 50m Arm Telescopic Brand Palfinger Standards Safety spreader plates Driver information system Telescopic basket Automated positioning system Memory-Function Rear view camera 230 V CEE current supply with CEE socket in the workman cage Assistance systems Options Powerlift-System: Transport device for working material with max. 600 kg payload to be carried externally on the basket Material handler/crane in basket for lifting objects from the Powerlift and direct assembly at the place of use (400 kg payload). Telescopic camera basket with 600 kg basket load including mount for film illumination Ultrasonic sensors to protect the workman basket from collisions Mobile radio remote controls for access platform and stabilizer operation Access from both sides (access ladder on right and left-hand side) with lighting