Where to buy a used 7.5 tonne truck in the UK, and what licence you need

You can buy a used 7.5 tonne truck in the UK from commercial vehicle dealers, rental and fleet disposal sales, auctions and online marketplaces. To drive one you need category C1 on your licence, which you’ll usually already have if you passed your car test before 1 January 1997.

The Commercial Trader, a UK marketplace for commercial vehicles, machinery and equipment, listed about 1,690 new and used trucks for sale on 19 November 2026, and its truck weight filter narrows them to the 5,000 to 10,000kg band. On that day the first page of box trucks alone held four DAF LF 180 7.5 tonne box vans with tail lifts.

Where can you buy a used 7.5 tonne truck in the UK?

A used 7.5 tonne truck can be bought from a truck maker’s dealer, an independent commercial vehicle dealer, a rental or fleet disposal sale, an auction, an online marketplace or a private seller. The table shows what each route gives you and what to watch for.

RouteWhat you getWhat to watch for
Truck maker’s dealer or used schemeAn inspected truck of one make, usually with a warrantyHigher prices and less choice of body
Independent commercial vehicle dealerA choice of makes and bodies, often prepared and testedWhat any warranty covers, and for how long
Rental or fleet disposal saleOne owner and a known service history, often a box body with a tail liftUsually a standard specification, so check it suits your loads
AuctionA quick purchaseSold as seen, with a buyer’s premium on top
Online marketplace such as The Commercial TraderTrucks from many sellers in one place, and direct contact with each sellerYou arrange the checks, the viewing and the transport yourself
Private sellerSometimes a lower priceNo warranty, and the paperwork is yours to check

How do you find a 7.5 tonne truck on The Commercial Trader?

The Commercial Trader has no separate 7.5 tonne category, so you find these trucks with the weight filter or by body type. Open used trucks for sale, set Truck Weight to 5,000 to 10,000kg, then add your location and a distance to see the trucks nearest to you.

A 7.5 tonne truck also appears in the body type sections. On 19 November 2026 The Commercial Trader listed about 95 box trucks, 185 curtainside trucks, 115 dropside trucks, 175 tipper trucks, 105 flatbed trucks and 50 refrigerated trucks, across all weights.

The first page of used box trucks that day held four DAF LF 180 7.5 tonne box vans with tail lifts, dated from 2019 to 2022 and all price on application. The first page of used curtainside trucks had a 2024 Isuzu Forward N75.190 7.5 tonne curtainsider at an asking price of £39,950.

Sellers write the weight in different ways, such as 7.5 ton, 7.5T GVW or 7,500kg. Look for each in the listing titles, and confirm the plated weight with the seller before you travel to see a truck.

Can you drive a 7.5 tonne truck on a car licence?

Only if your licence shows category C1. Category C1 covers vehicles between 3,500kg and 7,500kg maximum authorised mass, with a trailer of up to 750kg, as the driving licence categories on GOV.UK set out.

If you passed your car test before 1 January 1997 you’ll usually have C1 already, because those licences normally allow a vehicle and trailer combination of up to 8,250kg. If you passed on or after that date, a car licence stops at 3,500kg, and you’ll need to pass the C1 test before you can drive a 7.5 tonne truck.

Don’t rely on the date alone. The same GOV.UK page links to a service that shows which vehicles your own licence lets you drive, and it takes a couple of minutes to check.

Do you need an operator’s licence for a 7.5 tonne truck?

Yes, if a business uses the truck. In Great Britain a business needs a goods vehicle operator’s licence to use any goods vehicle with a gross plated weight over 3,500kg, and a 7.5 tonne truck is well over that.

The operator’s licence belongs to the business, not to the driver, and it’s separate from the C1 driving licence. Some vehicles are exempt, and the rules are different in Northern Ireland, so read the government’s guidance before the truck starts work.

Do you need a tachograph and Driver CPC?

In most cases, yes to both. Drivers’ hours and tachograph rules cover most goods vehicles over 3.5 tonnes unless an exemption applies, and anyone who drives a lorry as the main part of their job needs the Driver Certificate of Professional Competence.

Driver CPC takes 35 hours of training every five years to keep, and driving professionally without it can bring a fine of up to £1,000. There are exemptions, and GOV.UK publishes worked examples that show who needs it and who doesn’t.

Which body type do you need?

Choose the body for the load, because the body decides what a 7.5 tonne truck can carry and how you load it. The Commercial Trader lists each body type in its own section.

The payload of a 7.5 tonne truck is its plated weight minus its unladen weight. The body, the tail lift and any fridge unit all come out of that 7,500kg, so ask the seller for the unladen weight or a weighbridge ticket.

Where can you drive a 7.5 tonne truck?

Anywhere a lorry is allowed, but speed limits and emission zones treat a 7.5 tonne truck as a goods vehicle and not as a van. The national limits for goods vehicles of up to 7.5 tonnes are 50mph on single carriageways, 60mph on dual carriageways and 70mph on motorways, or 60mph on a motorway when towing, according to the speed limits on GOV.UK. A goods vehicle over 3.5 tonnes also has to have a speed limiter fitted.

London’s Low Emission Zone needs lorries over 3.5 tonnes to meet Euro VI. A 7.5 tonne truck that doesn’t pays £100 a day if it meets Euro IV or V and £300 a day if it doesn’t, according to Transport for London.

Seven Clean Air Zones in England also charge heavy goods vehicles below Euro VI: Bath, Birmingham, Bradford, Bristol, Portsmouth, Sheffield and Tyneside. London’s HGV safety permit, under the Direct Vision Standard, applies to lorries over 12 tonnes, so a 7.5 tonne truck doesn’t need one.

What should you check before you pay?

Check the test history, the paperwork and the plate before anything else. The annual test history of a lorry is free to look up online for tests since 2018, and it shows the passes, the failures and the advisories.

Match the V5C registration certificate to the seller and the registration number, and read the weight on the truck’s plate so you know it’s plated at 7,500kg. If the truck has a tail lift, ask for its latest thorough examination report. A tail lift is lifting equipment, and lifting equipment has to be thoroughly examined at least every 12 months, or every 6 months if it lifts people.

For the full list of checks, see what to check before buying a used HGV. If you need something heavier than 7.5 tonnes, see where to buy a used HGV in the UK.

Frequently asked questions

Can I drive a 7.5 tonne truck on a car licence?

You can drive a 7.5 tonne truck only if your licence includes category C1. Drivers who passed their car test before 1 January 1997 usually have C1 already. Anyone who passed on or after that date has to pass the C1 test first.

What licence do I need for a 7.5 tonne truck if I passed my test after 1997?

You need category C1, which covers vehicles between 3,500kg and 7,500kg. A car licence gained on or after 1 January 1997 stops at 3,500kg. If you’ll drive the truck for a living, you’ll usually need Driver CPC as well.

Do I need an operator’s licence for a 7.5 tonne truck?

Yes, if a business in Great Britain uses the truck, because a 7.5 tonne truck is over 3,500kg gross plated weight. The operator’s licence belongs to the business and not to the driver. Some vehicles are exempt, and Northern Ireland has its own rules.

How much can a 7.5 tonne truck carry?

A 7.5 tonne truck can carry 7,500kg minus its own unladen weight. The unladen weight changes with the body, the tail lift and any fridge unit, so there’s no single figure. Ask the seller for the unladen weight or a weighbridge ticket.

Where is the best place to buy a used 7.5 tonne truck?

The best place to buy a used 7.5 tonne truck depends on what you want from the sale. A dealer gives you a prepared truck and sometimes a warranty, a rental or fleet sale gives you a known history, and an auction is quick. A marketplace such as The Commercial Trader lets you compare trucks from many sellers by weight, body and location.

Can you buy a used 7.5 tonne truck on The Commercial Trader?

Yes. The Commercial Trader has no separate 7.5 tonne category, so set the Truck Weight filter to 5,000 to 10,000kg or look in the body type sections. On 19 November 2026 the first page of box trucks held four DAF LF 180 7.5 tonne box vans.

Can I drive a 7.5 tonne truck in London’s Low Emission Zone?

Yes, and without a charge if the truck meets Euro VI. A truck over 3.5 tonnes that falls below Euro VI pays £100 a day if it meets Euro IV or V, and £300 a day if it doesn’t. A 7.5 tonne truck doesn’t need London’s HGV safety permit, which applies above 12 tonnes.

Thanks, your submission was successful!

Seller Details

Listing Address

Advertise with The Commercial Trader

Thanks for choosing to advertise on The Commercial Trader – please fill in your information below and one of our team will be in contact within the next 48 hours to arrange uploading your products for you.