Where to buy used industrial machinery in the UK: dealers, auctions and marketplaces

You can buy used industrial machinery in the UK from specialist machinery dealers, auctions of factory and plant assets, online marketplaces and, for some equipment, the manufacturer. The Commercial Trader, a UK marketplace for commercial vehicles, machinery and equipment, had about 3,790 listings of new and used industrial machinery for sale on 19 November 2026 in 33 categories, with the most in pumps, filters, processing vessels, conveying systems and packaging machines.

Industrial machinery covers very different things, from machine tools to process plant, and each kind is sold in different places. Work out which kind you need before you choose where to look.

Where can you buy used industrial machinery in the UK?

Used industrial machinery is sold in five ways in the UK: by specialist dealers, at auctions of factory and plant assets, on online marketplaces, by manufacturers and directly by factories. The table shows what each route gives you and what to watch for.

RouteWhat you getWhat to watch for
Specialist machinery dealerMachines of one type, often tested or refurbished, sometimes with a warrantyHigher prices than auction, and stock limited to the dealer’s specialism
Auction of factory or plant assetsA whole site’s equipment on one sale dateSold as seen, a buyer’s premium on top, and removal at your cost
Online marketplace such as The Commercial TraderListings from many sellers in one place, and direct contact with each sellerYou arrange the inspection, the dismantling and the transport
ManufacturerRefurbished or ex-demonstration machines with the maker’s supportA limited choice of machines
Direct from a factory that’s closing or upgradingA machine you can see running where it standsNo warranty, and removal to arrange

What kinds of industrial machinery can you buy used?

Almost every kind of industrial machine is sold used, and the kinds fall into five groups. Knowing which group you’re buying from tells you where to look.

  • Machine tools: lathes, milling machines, machining centres and presses, sold by machine tool dealers and at auction.
  • Process machinery: pumps, mixers, vessels, reactors, filters and dryers, sold by process plant dealers, at auction and on marketplaces.
  • Packaging and filling machinery: fillers, cappers, sealers, wrappers and complete lines.
  • Plastics machinery: extruders and injection moulding machines.
  • Handling equipment: conveyors and conveying systems.

The Commercial Trader’s industrial section is mostly process, packaging and handling equipment. It has no category for CNC machines or lathes, though its Mills and Presses categories hold some metalworking machines.

What industrial machinery is listed on The Commercial Trader?

The Commercial Trader had about 3,790 industrial machinery listings on 19 November 2026, new and used, in 33 categories. The table shows fourteen of those categories on that day.

CategoryListings on 19 November 2026
Industrial pumpsabout 635
Industrial filtersabout 580
Processing vesselsabout 465
Conveying systemsabout 250
Industrial packaging machinesabout 240
Industrial mixersabout 150
Automatic linesabout 95
Filling machinery73
Pressesabout 50
Extrudersabout 40
Millsabout 30
Industrial plastic machineryabout 25
Industrial centrifuges10 to 18
Reactors5

These counts come from The Commercial Trader’s listing pages, which show nine listings a page, and they change daily. The listings are a mix of new equipment from suppliers and used machines from dealers and end users.

The Commercial Trader’s industrial machinery page describes its sellers as manufacturers, dealers, brokers and end-users. Listings read on 19 November 2026 came from sellers in the UK and overseas, so check where a machine is before you enquire.

Machines listed that day included Pfaudler glass-lined reactors, a 2006 Zalkin rotary capper, a Bosch blister line and a 12,800 litre stainless steel vessel. Use the Condition filter to show used machines only. Many listings are price on application.

Which websites list used industrial machinery in the UK?

Three kinds of website list used industrial machinery for UK buyers: UK marketplaces, Europe-wide marketplaces and auction platforms. They differ in where the machine is, who arranges the transport and whether you can see the machine running.

  • A UK marketplace such as The Commercial Trader carries listings placed by sellers, and you deal with the seller directly.
  • A Europe-wide marketplace carries more machines, many of them abroad. If a machine is outside the UK, allow for transport, import paperwork and VAT.
  • An auction platform sells on set dates. Lots are usually sold as seen, and the buyer removes them by a deadline.

On any of these websites, a useful listing gives the maker, model, year, serial number, condition and location. Ask for whatever is missing before you arrange a viewing.

Should you buy from a dealer, an auction or a marketplace?

Buy from a dealer if you want the machine tested and backed, at auction if price matters most and you can judge a machine yourself, and on a marketplace if you want to compare sellers and talk to them directly. The cheapest route on paper isn’t always the cheapest once the machine is installed and running.

A dealer’s price usually includes some preparation, and sometimes a warranty and delivery. An auction price leaves dismantling, transport and any repairs to the buyer. A marketplace sits between the two: the seller may be a dealer, a broker or the factory that used the machine, so ask which.

What does the law expect of second-hand industrial machinery?

The seller has to supply it safe, and the buyer has to keep it safe in use. The Health and Safety Executive says anyone supplying second-hand equipment for use at work must make sure, so far as reasonably practicable, that it’s safe, and must supply adequate information with it.

The buyer’s duties come from the Provision and Use of Work Equipment Regulations. HSE’s guidance on refurbished and modified machinery says such machinery must be safe when used and meet those regulations in full.

Pressure equipment has an extra step. Before a pressure system is used, whether it’s new or second-hand, a written scheme of examination has to be in place and the examination carried out, under the Pressure Systems Safety Regulations 2000.

What should you ask the seller before you buy?

Ask what the machine is, how it has been used and what it will take to move it. Those answers decide whether the price is a good one.

  • What are the maker, model, year and serial number?
  • Do the manuals and drawings come with it?
  • What electrical supply does it need?
  • When did it last run, and why is it being sold?
  • Can you see it running under power?
  • Who dismantles it, loads it and delivers it?
  • Does the maker still supply spare parts?

Moving and installing a machine can cost as much as buying it. The Commercial Trader’s guide to budgeting for buying and installing used process machinery sets out the costs to allow for.

How do you buy industrial machinery on The Commercial Trader?

Pick a category in The Commercial Trader’s industrial section, filter it, and send an enquiry from the listing. The enquiry goes to the seller, and the sale is agreed between the two of you.

  1. Open used industrial machinery for sale and choose a category.
  2. Set the Condition filter to used if you don’t want new equipment.
  3. Add your location and a distance, or check each listing’s location.
  4. Ask the seller for a price, a full specification and the serial number.
  5. Inspect the machine, or have someone competent inspect it, before you pay.

If you’re selling a machine to make room for the next one, see the guide to how to value and sell used industrial machinery.

Frequently asked questions

Where is the best place to buy used industrial machinery in the UK?

The best place to buy used industrial machinery depends on the machine. Machine tools are mostly sold by specialist dealers and at auction, while process and packaging machinery is also sold on marketplaces such as The Commercial Trader. A dealer gives the most support, and an auction usually gives the lowest price with the least.

Can you buy used industrial machinery on The Commercial Trader?

Yes. The Commercial Trader had about 3,790 industrial machinery listings on 19 November 2026, new and used, including about 635 pumps, 465 processing vessels and 240 packaging machines. Set the Condition filter to used to leave out new equipment.

Does The Commercial Trader list CNC machines and machine tools?

The Commercial Trader has no category for CNC machines or lathes. Its Mills and Presses categories hold some metalworking machines, and most of its industrial section is process, packaging and handling equipment. For a wide choice of machine tools, a machine tool dealer or an auction is the usual route.

Is it safe to buy used industrial machinery at auction?

Buying at auction is safe if you inspect the machine first and read the sale terms. Auction lots are usually sold as seen, a buyer’s premium and VAT are added, and the buyer pays for removal. The seller’s legal duty to supply safe equipment for use at work still applies at auction.

Does used machinery come with a warranty?

Sometimes. A dealer or a manufacturer may give a warranty on a used or refurbished machine, and an auction or a private sale usually doesn’t. Get any warranty in writing, with what it covers and for how long.

Does used machinery have to be safe when it’s sold?

Yes. Anyone supplying second-hand equipment for use at work must make sure, so far as reasonably practicable, that it’s safe, and that includes dealers, auctioneers and private sellers. The buyer then has to keep the machine safe in use.

Who pays to dismantle and move a used machine?

The buyer usually pays, unless the seller has agreed otherwise in writing. Ask who will disconnect, dismantle, load and deliver the machine before you agree a price, because those costs can match the price of the machine.

Thanks, your submission was successful!

Seller Details

Listing Address

Advertise with The Commercial Trader

Thanks for choosing to advertise on The Commercial Trader – please fill in your information below and one of our team will be in contact within the next 48 hours to arrange uploading your products for you.